Showing posts with label no electrical required. Show all posts
Showing posts with label no electrical required. Show all posts

Friday, August 30, 2019

Marey GA16NGDP & GA16LPDP Stocking in all Warehouses

GlobalTowne is pleased to announce that we will now be stocking the Marey GA16NGDP & Marey GA16LPDP gas tankless water heaters in all 3 of our warehouses.  GlobalTowne has warehouses in Tennessee, Ohio and Nevada.  We will be stocking the Marey units in all three warehouses that way we can get the product to the end user in usually 2 days.  See the specifications below for the Marey GA16 Litre units below. 
Marey GA16 Litre specifications:

  • Comes in either Natural Gas or Liquid Propane
  • 119,00 BTU
  • Battery ignition (No electric power required)
  • Vents vertically using 5" type B vent
  • Great for off grid applications
  • 3.5 Max Flow rate.
Please call GlobalTowne at 888-726-9752 for further information or to place an order.




Thursday, March 29, 2018

Marey Replacement for Bosch 80VP, Bosch 38B and Bosch 330PN

The Marey Power Gas GA10 or GA10DP 10L tankless water heater is the closest possible replacement for Bosch's popular line of 80VP, 38B or the 330PN tankless water heaters.  These units come in either Natural Gas (NG) or Liquid Propane (LP).  The only difference of the Marey GA10 and the GA10DP is that the GA10DP has a small digital panel on the front that shows the temperature when the heater is in use.
Like these Bosch tankless water heaters, the Marey GA10 or GA10DP tankless water heater has no electric requirement and uses 4" double-walled galvanized B-Vent for its exhaust venting. The Marey GA10 or GA10DP is perfect for off-grid applications.

While the Bosch 80VP, 38B and 330PN tankless water heaters all had a standing pilot light, the Marey 10L 2.6 GPM unit uses two D-Cell batteries for its ignition source.

At 79,000 BTUs, the Marey GA10 or GA10DP is very close to the 78,000 BTU maximum input of the Bosch 80VP, 38B and 330PN water heaters.

Marey GA10 or GA10DP 10L 2.6 GPM Tankless Water Heater
If you are looking to replace your existing Bosch 80VP, 38B or 330PN tankless water heater and your current unit is vented vertically through the roof then the Marey GA10 or GA10DP will be a simple and straightforward replacement.

The Marey Power Gas GA10 or GA10DP must be vented vertically with 4" galvanized B vent and there is no sidewall power vent for these units.

The Marey GA10 or GA10DP will work with lower water pressures than the Bosch tankless water heaters; the Marey GA10 or GA10DP will run on a minimum of 10 PSI water pressure.

The Marey GA10 and GA10DP 10L tankless water heaters are approved for installation throughout the US (including California) and Canada.

Please call GlobalTowne at 888-726-9752 for further questions or to place an order.


Wednesday, May 4, 2016

Marey Power Gas 5L Gas Tankless Water Heater

GlobalTowne now carries the Marey Power Gas 5L tankless water heater.  This unit is small and designed for 1 low flow application (1 shower) with a maximum gallons per minute (gpm) of 2.0 gpm. The Marey 5L is recommended for use in the southern states where the incoming ground water is warmer.  The Marey Power Gas 5L has a thermal efficiency of 87%.  This unit is for small homes, camps and cottages with low water pressure and only requires a minimum of 10 psi to operate.  The Power Gas 5L will give you endless hot water and only takes a few seconds for the hot water to reach the tap.  The unit is equipped with anti-combustion and safety protection.  The Power Gas 5L also has a Summer/Winter control knob for obtaining more stable temperatures at different times during the year. Please see some of the highlights of the unit listed below.

  • Power Gas 5L unit comes in either Natural Gas (NG) or Liquid Propane (LP)
  • Available Models: GA5L NG and GA5L LP
  • Recommended venting is 4" Double Wall B-Vent (Check local code)
  • Power Gas 5L is 34,600 BTU
  • Unit requires 2 "D" Cell batteries for ignition (no electrical connection required)
  • Minimum water pressure required is 10 PSI.
  • Minimum activation flow rate is .5 gpm.
  • 1/2" water and gas connections
  • 32 degree temp rise @ 2.0 gpm
  • 43 degree temp rise @ 1.5 gpm
  • Overall dimensions are 17"x11.5"x4.75"
  • Weight of the unit is 11 lbs
  • 5 year Warranty