Marey Power Gas 5L Gas Tankless Water Heater

GlobalTowne now carries the Marey Power Gas 5L tankless water heater.  This unit is small and designed for 1 low flow application (1 shower) with a maximum gallons per minute (gpm) of 2.0 gpm. The Marey 5L is recommended for use in the southern states where the incoming ground water is warmer.  The Marey Power Gas 5L has a thermal efficiency of 87%.  This unit is for small homes, camps and cottages with low water pressure and only requires a minimum of 10 psi to operate.  The Power Gas 5L will give you endless hot water and only takes a few seconds for the hot water to reach the tap.  The unit is equipped with anti-combustion and safety protection.  The Power Gas 5L also has a Summer/Winter control knob for obtaining more stable temperatures at different times during the year. Please see some of the highlights of the unit listed below.

• Power Gas 5L unit comes in either Natural Gas (NG) or Liquid Propane (LP)
• Available Models: GA5L NG and GA5L LP
• Recommended venting is 4" Double Wall B-Vent (Check local code)
• Power Gas 5L is 34,600 BTU
• Unit requires 2 "D" Cell batteries for ignition (no electrical connection required)
• Minimum water pressure required is 10 PSI.
• Minimum activation flow rate is .5 gpm.
• 1/2" water and gas connections
• 32 degree temp rise @ 2.0 gpm
• 43 degree temp rise @ 1.5 gpm
• Overall dimensions are 17"x11.5"x4.75"
• Weight of the unit is 11 lbs
• 5 year Warranty

Using Marey Gas Tankless Water Heaters in Remote Areas

GlobaTowne carries all the Marey gas tankless water heaters.  The Marey gas tankless water heaters are great for remote locations where there is no power and minimal water flow and pressure.  The Marey Power Gas 16L, Power Gas 10L and the Power Gas 5L heaters will all operate without using any electricity.  The Marey units operate on 2 - "D" cell batteries and require only 10 psi of water pressure making them great for camps and cottages in remote locations.

The Marey Power Gas tankless water heaters should be mounted indoors but if they have to be mounted outside then they would have to have a box built around them to protect them from the elements.  Only install the Marey Power Gas units outside in a protected box only if you are in an area where it is not going to freeze.  If the temperature is going to get down below 32 degrees F then you would want to drain the tankless water heater and also maybe bring the unit inside.

The Marey Power Gas 16L, 10L and the 5L heaters can operate on a small 20 lb LP tank as long as you have the correct regulator on the tank.  Please refer to the installation manual for proper gas line sizing and gas pressure.

Please call GlobalTowne at 888-726-9752 for any further help deciding what Marey gas tankless would be best for your remote application.

Marey ECO180 Whole-House Electric Tankless Water Heater

GlobalTowne is now carrying the Marey electric tankless water heaters. The Marey ECO180 is an 18KW whole-house electric tankless water heater.  It is recommended that you have at least a 150 amp electrical service to your home before installing the Marey ECO 180. The Marey ECO180 gets hard wired in using 8 gauge wire to 2 double pole 50 amp breakers. The ECO180 is good for 1 major application (1 shower) at a time in the southern states.  The Marey ECO180 may be too small for the northern states where the incoming ground water is a lot cooler.  Please reference the Temperature map at the bottom to make sure this is the right unit for your area. The ECO180 has a digital display and shows the temp of the hot water when in use.

Marey heating elements are made from a single piece of cast aluminum, so there will never be water leakage non electric leakage in the heating chamber. Marey heaters also have an extra stainless steel water flow channel instead of the previous layered plate style, so no matter how your water quality is inside the heating element, it will provide a long life of service.  The compact and powerful Marey electric tankless water heaters are CE and ETL Approved and designed with German Technology. They come with stainless steel covers to guaranty long product life.

Marey ECO180 requires home to have a minimum of 150 amp service

Hard wired in with 8 ga wire to 2 - double pole 50 amp breakers

New integrated aluminum heat exchanger

Water connections are 3/4" NPT

Minimum water pressure required is 10 PSI.

Minimum activation flow rate is .85 gpm.

74 degree temperature rise at 2.0 GPM

46 degree temperature rise at 3.0 GPM

36 degree temperature rise at 4.0 GPM

29 degree temperature rise at 5.0 GPM

Overall dimensions are 16" x 11" x 3.5"

Weight of the unit is 16.4 lbs

5 year Warranty

Please click here to visit the Marey Temperature Map to make sure this is the right heater for your area.

 

Marey ECO210 Whole-House Electric Tankless Water Heater

GlobalTowne is now carrying the Marey electric tankless water heaters. The Marey ECO210 is a 21KW whole-house electric tankless water heater.  It is recommended that you have a 200 amp electrical service to your home before installing the Marey ECO 210. The Marey ECO210 gets hard wired in using 8 gauge wire to 3 double pole 40 amp breakers. The ECO210 is good for 1 major application (1 shower) at a time. The ECO210 has a digital display and shows the temp of the hot water when in use.

Marey heating elements are made from a single piece of cast aluminum, so there will never be water leakage non electric leakage in the heating chamber. Marey heaters also have an extra stainless steel water flow channel instead of the previous layered plate style, so no matter how your water quality is inside the heating element, it will provide a long life of service.  The compact and powerful Marey electric tankless water heaters are CE and ETL Approved and designed with German Technology. They come with stainless steel covers to guaranty long product life.

Marey ECO210 requires home to have minimum of 200 amp service

Hard wired in with 8 ga wire to 3 - double pole 40 amp breakers

New integrated aluminum heat exchanger

Water connections are 3/4" NPT

Minimum water pressure required is 10 PSI.

Minimum activation flow rate is .85 gpm.

76 degree temperature rise at 2.0 GPM

60 degree temperature rise at 3.0 GPM

45 degree temperature rise at 4.0 GPM

34 degree temperature rise at 5.5 GPM

Overall dimensions are 16" x 11" x 3.5"

Weight of the unit is 16.4 lbs

5 year Warranty

Please click here to visit the Marey Temperature Map to make sure this is the right heater for your area.

 

Marey ECO240 Whole-House Electric Tankless Water Heater

GlobalTowne is now carrying the Marey electric tankless water heaters. The Marey ECO240 is a 24KW whole-house electric tankless water heater.  It is recommended that you have a 200 amp electrical service to your home before installing the Marey ECO 240. The Marey ECO240 gets hard wired in using 8 gauge wire to 3 double pole 40 amp breakers. The ECO240 is good for 1 major application (1 shower) at a time in the northern states and may do 2 major applications in the southern states where the incoming ground water is warmer. The ECO240 has a digital display and shows the temp of the hot water when in use.

Marey heating elements are made from a single piece of cast aluminum, so there will never be water leakage non electric leakage in the heating chamber. Marey heaters also have an extra stainless steel water flow channel instead of the previous layered plate style, so no matter how your water quality is inside the heating element, it will provide a long life of service.  The compact and powerful Marey electric tankless water heaters are CE and ETL Approved and designed with German Technology. They come with stainless steel covers to guaranty long product life.

 

Marey ECO240 requires home to have minimum of 200 amp service

Hard wired in with 8 ga wire to 3 - double pole 40 amp breakers

New integrated aluminum heat exchanger

Water connections are 3/4" NPT

Minimum water pressure required is 10 PSI.

Minimum activation flow rate is .85 gpm.

72 degree temperature rise at 2.0 GPM

59 degree temperature rise at 3.0 GPM

48 degree temperature rise at 4.0 GPM

38 degree temperature rise at 6.0 GPM

Overall dimensions are 16" x 11" x 3.5"

Weight of the unit is 16.4 lbs

5 year Warranty

Please click here to visit the Marey Temperature Map to make sure this is the right heater for your area.

Marey Power Gas 16L DP Gas Tankless Water Heater

GlobalTowne now carries the Marey Power Gas 16L Digital Panel (DP) gas tankless water heater. This unit is designed for 1 major application (1 shower) with a maximum gallons per minute (gpm) of 4.3 gpm. The Marey Power Gas 16L DP has a thermal efficiency of 87%.  This unit is great for homes with low water pressure and only requires a minimum of 10 psi to operate.  Both the water flow and gas flow can be adjusted simply with the control knobs on the front of the unit.  Perfect alternative for those homes experiencing frequent power outages. The Power Gas 16L DP will give you endless hot water and only takes a few seconds for the hot water to reach the tap.  The unit is equipped with anti-combustion and safety protection.  The digital panel (DP) will read the outgoing temperature of the hot water while in use. Please see some of the highlights of the unit listed below.

• Power Gas 16L DP unit comes in either Natural Gas (NG) or Liquid Propane (LP)
• Available Models: GA16NGDP and GA16LPDP
• Recommended venting is 5" Double Wall sealed stainless steel (Check local code)
• Power Gas 16L DP is 111,903 BTU
• Unit requires 2 "D" Cell batteries for ignition (no electrical connection required)
• Minimum water pressure required is 10 PSI.
• Minimum activation flow rate is .05 gpm.
• 71 degree temperature rise at 2.0 GPM
• 48 degree temperature rise at 3.0 GPM
• 33 degree temperature rise at 4.3 GPM
• 1/2" water and gas connections
• Overall dimensions are 27.9"x16.5"x8.2"
• Weight of the unit is 29 lbs
• 5 year Warranty

Please contact GlobalTowne with any further questions or to place your order at 888-726-9752.